Kubota G21LD / G21HD Workshop Manual page 88

G21LD · G21HD, WSM
Separating Engine
1. Pull out the hairpin cotters from the radiator.
2. Remove the engine mounting nuts, and support the engine with
an engine lift hook and hoist.
3. Separate the engine with the radiator from the frame, taking care
not to damage the radiator.
(When reassembling)
• Fit the radiator to the frame, adjusting the clearance between the
radiator and the fan as shown in the figure.
Tightening torque Engine mounting nut
(Reference)
Clearance between fan Factory
and radiator spec.
(1) Fan
(2) Radiator
1-S16
ENGINE
23.5 to 27.5 N·m
2.4 to 2.8 Kgf·m
17.4 to 20.3 ft-lbs
9.0 mm
L
0.35 in.
2.0 mm
H
0.08 in.
L : Circumferential clearance
between fan and radiator
H : Longitudinal clearance between
fan and radiator
W1021955
KiSC issued 08, 2007 A