Kubota G21LD / G21HD Workshop Manual page 102

G21LD · G21HD, WSM
Crankshaft Assembly
1. Remove the main bearing case screw 2 (1).
2. Pull out the crankshaft assembly.
(When reassembling)
• Install the crankshaft sub assembly, aligning the screw hole of
main bearing case 2 with the screw hole of cylinder block.
• Apply engine oil to the main bearing case screw 2. And tighten it.
Tightening torque Main bearing case screw 2
(1) Main Bearing Case Screw 2
1-S30
ENGINE
26.5 to 30.4 N·m
2.7 to 3.1 kgf·m
19.5 to 22.4 ft-lbs
W1031360
KiSC issued 08, 2007 A