Kubota G21LD / G21HD Workshop Manual page 314

G21LD · G21HD, WSM
Clearance between Tension Collar and Tension Arm Bushing
1. Measure the tension collar O.D. with an outside micrometer.
2. Measure the tension arm bushing I.D. with an inside micrometer,
and calculate the clearance.
3. If the clearance exceeds the factory specification, replace them.
Clearance between
tension collar and Factory spec.
tension arm bushing
Tension collar O.D. Factory spec.
Tension arm bushing
Factory spec.
I.D.
9-S15
MOWER
0.005 to 0.117 mm
0.0002 to 0.0046 in.
18.997 to 19.027 mm
0.7479 to 0.7491 in.
19.032 to 19.114 mm
0.7493 to 0.7525 in.
W1014933
KiSC issued 08, 2007 A