Editing A Profile; Importing A Profile; Exporting A Profile - Kyocera TASKalfa 3010i Driver Manual

6

Editing a Profile

1
2
3
4
5

Importing a Profile

1
2
3

Exporting a Profile

1
2
3
4
Printer Driver
Click OK to close the dialog box.
Note: To reset the printer driver to default settings, select the Factory Default
profile, if available, and then click Apply. This clears the settings of a selected
profile.
You can remove a profile by clicking Profiles to open the Profiles dialog box.
Select the profile in the Select profile list and click Delete. You cannot delete
the Factory Default profile.
In any tab, click Profiles.
In the Select profile section, select the profile to be edited, and then click Edit.
You can edit any of the three options: Name, Icon and Description.
Click OK to save the edited changes.
The newly edited profile appears in the Profiles dialog box and the Quick Print
tab.
Click Apply to use the selected profile to the current print job, or click OK to
close the dialog box.
In any tab, click Profiles > Import.
Browse for an existing profile (.KXP), select it, and then click Open.
A message appears if any of the profile settings in the imported file are
unavailable in the existing driver. Select Yes to import the profile, or No to
cancel the import.
If you selected Yes, the newly imported profile appears in the Profiles dialog
box.
Click Apply to use the selected profile for the current print job, or click OK to
close the dialog box.
The newly added profile appears in the Quick Print tab.
In any tab, click Profiles.
In the Select profile section, select the profile to be exported, and then click
Export.
In the Export Profile dialog box, name and save the profile.
Click OK to close the Profiles dialog box.
Quick Print
4-6