Fader Start Function; Channel Fader Start; Cross Fader Start; (Cross Fader Start) - Denon DN-X600 Owner's Manual

Fader start function

SOURCE SEL
CROSS
Cross fader
Channel fader

CROSS FADER START

CH FADER START

The fader start function controls playback/pause of the CD/Media
player using the fader control on the unit by sending a fader command
to the player.
Connect the FADER terminal on this unit to a FADER compatible DJ
player using a 3.5mm stereo mini plug cable in advance.

Channel fader start

1
Switch the CH FADER START to "ON".
2
SOURCE SEL
Adjust to match the CD input ("CD1"
or "CD2").
3
Move the channel fader knob for the CD input
channel to the lowest position.
The player switches to CUE up status.
4
Move the channel fader knob upwards.
The CD player starts playback.
If the channel fader knob is then moved all the way down, the
player stops.
Cross fader start
This section explains how to start playback for a CD/Media player
connected to CH1.
1
Switch the CROSS FADER START
2
Turn the CH1 SOURCE SEL to "CD1".
3
Slide the cross fader all the way to the "2" (CH2)
position.
4
The player switches to CUE up status.
5
Set CROSS to a position other than "THRU".
6
Move the cross fader in the opposite direction.
The player starts playback.
NOTE
CROSS
If you set to the "THRU" position, the cross fader start
function will be disabled.
to "ON".
12