Part Names And Functions; Top Panel - Denon DN-X600 Owner's Manual

Part names and functions

Top panel

For buttons not explained here, see the page indicated in parentheses ( ).
E2
E1
E0
W9
W8
W7
W6
W5
W4
W3
W2
W1
W0
Q9
Q8
Q7 Q4 Q5
3
E3 E4 E5 E6 E2 E3 E 4
E7 E8 E9
Q6 Q5 Q4
q
USB enable display (USB)
• Lights a pale blue color when connected to a
computer.
• Lights a deep blue color when MIDI command
is sent.
w
q Booth/Send, Effect/Send level adjustment
knob (BOOTH/SEND LEVEL) ······················· (5)
e
w Display
Displays the BPM value and device settings.
r
Beat display ················································ (11)
t
Beat switch button (BEAT) ············ (11, 14, 15)
e
y
Tap button
r
(TAP/LOCK/AUTO/INPUT BPM) ··· (11, 14, 15)
TAP:
• When this button is tapped repeatedly, the
t
BPM is measured using the intervals between
taps.
y
LOCK:
• When this button is pressed once in the
u
auto BPM mode, the BPM value measured
automatically is locked.
i
AUTO BPM:
o
• When this button is held down for one second,
the mode switches to auto BPM mode, and
the measured BPM value is displayed.
INPUT BPM:
Q0
• When this button is held down for more than
2 seconds, the mode switches to BPM input
Q1
mode, and the BPM value can be entered
directly using the t beat selection button.
Q2 This mode is cleared by pressing the button
again.
u
Send/Return mode selection button
(SEND/RETURN) ········································ (10)
Q3
i
Send/Return mode display
(SEND/RETURN) ········································ (10)
o
Effect selection knob
(EFX SELECT) ·············································· (11)
Q0
Effect filter adjustment knob
(EFX FREQ) ·················································· (11)
Q1
Effect CUE button (CUE) ···························· (11)
Q2
Dry/Wet adjustment knob
(DRY/WET) ·················································· (11)
Q3
Effect ON/OFF button
(ON/OFF) ····················································· (11)
Q4
Channel effect send button
(EFX SEND) ················································· (11)
• Flashes for target AUTO BPM
Q5
Channel fader
(CH FADER) ············································· (9, 12)
Q6
Cross fader
(CROSS FADER) ······································ (9, 12)
Q7
Headphone level adjustment knob
(PHONES LEVEL) ·········································· (9)
• When using headphones, be cautious to avoid
prolonged loud volume in order to protect your
ears.
Q8
Split cue button
(SPLIT CUE) ··················································· (9)
Q9
Headphone pan adjustment knob (PAN) ··· (9)
W0
Channel monitor selection button
(MONITOR CH1/CH2) ··································· (9)
W1
Channel fader contour adjustment knob
(CH FADER CONTOUR) ······························ (13)
W2
Cross fader contour adjustment knob
(CROSS FADER CONTOUR) ······················· (13)
W3
MIC/AUX1 send level adjustment knob
(LEVEL) ·························································· (9)
Adjusts the send level to the master output for
the mic signal or AUX1 input signal.
W4
MIC/AUX1 effect insertion button
(EFX INS) ······················································· (9)
Various effects can be applied to mic input
signals and AUX1 input signals. Flashes for
target AUTO BPM
W5
MIC/AUX1 EQ adjustment knob
(HI/LOW) ······················································· (9)
Adjusts the frequency characteristics for the mic
input signal and AUX1 input signal.