Connections; Preparations; Cables Used For Connection; Input Terminal Connection - Denon DN-X600 Owner's Manual

Connections

NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Insert the plugs securely. Loose connections will result in the generation of noise.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Connect the cables to the correct input and output terminals.
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Preparations

Cables used for connection

Select the cables according to the equipment being connected.
n For RCA input terminals
L
R
RCA pin plug cable (Sold separately))
n For XLR input/output terminals
Balanced cable (Sold separately)
n For FADER terminals
Stereo mini plug cable (Sold separately)
n For USB terminal
USB cable (Included)

Input from external devices

L
R
• To use the AUX2/Effect/Return input terminal as the AUX2 input terminal, set the SELECT switch to "A".
• To connect a DJ CD player to this unit and use the fader start function, connect this unit to the FADER

Input terminal connection

External
Turntable 2
device 2
AUDIO AUDIO SIGNAL
OUT OUT GND
L R L R
L R L R
L R L R
External
device 1
AUDIO
OUT
L R
L R
L R
NOTE
terminal of the CD player.
Turntable 1
SIGNAL AUDIO
GND OUT
L R
L R
CD player 1 CD player 2
AUDIO FADER AUDIO
L R
OUT OUT
L R L R
L R L R
L R L R
FADER
6