Ptions; General Ordering Requirements - Motorola V186 - Cell Phone - GSM System Planner Manual

General Ordering Requirements

1. All orders must list the Model (F75XX) as a main line item.
2. Models F7573 and F7574, (CM200 / CM140 / EM200 / GM3188 conventional
radio models) require ordering option V85x (radio type by region).
3. Models F7553 and F7554 (HT750/GP320/GP328 /PRO5150 conventional radio
models) require ordering option V95x (radio type by region).
4. Entering a frequency is mandatory for all models with radio.
5. The default frame for all models is No I/O Slots Frame (CPU and PS slots only).
To change to 3, 5, 7 or 8 I/O slots, add the required Frame option to the order
(V103, V104, V105, V107 or V108).
6. 8 I/O Slots Frame is provided with wall mount bracket. Installation on 19"rack
requires ordering 19" rack brackets option (V051). If V269 is used, two V051
units are required.
7. The Default Power Supply in all models excluding F7510 (expansion frame) is
DC 10.8-15.5 V (12 V DC PS), to change the power supply type, add the required
PS option.
8. The default CPU module for all models (except F7510) is CPU 3610. To change
to CPU3640 type, add V446. For I/O expansion, V446 on the main frame is
mandatory.
9. Model with conventional radio or analog trunked radio are provided with plug-in
radio modem installed in the CPU module.
10. Models with radio and orders that include battery option or accessories option
(such as RS-485 Junction Box) must be ordered with metal chassis or housing
options (mandatory).
11. Model F7510 (I/O Expansion Frame) includes an expansion module (CPU),
expansion power supply and expansion power cable. To change the power supply
type, add the required PS option to the order.
12. The expansion LAN switch occupies an I/O module slot. It is provided with a 60
cm LAN cable.
13. To connect a single expansion frame (for an RTU with up to 16 I/O module slots),
use a crossed LAN cable (3 meter length).
85
Ordering Information