Motorola MTM5400 Installation Manual

Tetra mobile terminal.
Hide thumbs
MTM5400
TETRA Mobile Terminal
Publication Number
68015000181-B
American Communication Systems
Discover the Power of Communications
When printed by Motorola
http://www.ameradio.com
TO ORDER – VISIT

   Also See for Motorola MTM5400

   Related Manuals for Motorola MTM5400

No related manuals

   Summary of Contents for Motorola MTM5400

  • Page 1

    MTM5400 TETRA Mobile Terminal Installation Manual Publication Number 68015000181-B American Communication Systems Discover the Power of Communications ™ When printed by Motorola http://www.ameradio.com TO ORDER – VISIT...

  • Page 3: Copyright, Copyrights, Computer Software Copyrights, Trademarks

    Trademarks Motorola, the Motorola Logo and all other trademarks identified as such herein are trademarks of Motorola Inc. All other product or service names are the property of their respective owners.

  • Page 4

    MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...

  • Page 5: Important Safety Information, Icon Conventions, Exposure Safety Standards

    (Motorola Publication part number 6804113J25 for APAC & LACR and 6866537D37 for EMEA) to ensure compliance with Radio Frequency (RF) energy exposure limits. For a list of Motorola-approved antennas and other accessories, visit the following web site which lists approved accessories for your radio model.

  • Page 6: Additional Important Information For Servicing And Installing The Terminal

    MTM5400 Mobile Terminal Installation Manual Product Safety and RF Exposure ADDITIONAL IMPORTANT INFORMATION FOR SERVICING AND INSTALLING THE TERMINAL Only specialized workshops should be contacted for installation, maintenance and repair work. This unit is equipped with protection fuses in the Power and Ignition Sense Cable. Replace...

  • Page 7: Document History

    DOCUMENT HISTORY MTM5400 Mobile Terminal Installation Manual DOCUMENT HISTORY The following major changes have been implemented in this manual since the previous edition: Edition Description Date 68015000181-A Initial edition Dec 2010 68015000181-B Toroid updates Dec 2010...

  • Page 8

    MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...

  • Page 9: Table Of Contents

    MTM5400 Manuals and User Guides........

  • Page 10: Table Of Contents

    MTM5400 Mobile Terminal Installation Manual CONTENTS Model Specifications* ........... . 22 Model Descriptions** .

  • Page 11: Table Of Contents

    CONTENTS MTM5400 Mobile Terminal Installation Manual Connection Plan for the Junction Box Accessory Terminal ..... 54 Connection Plan for Accessory Connector Kit (HLN9457) ..... 56 Connectors and Pin Assignment of the Radio.

  • Page 12

    MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...

  • Page 13: Scope, Scope Of This Manual

    SCOPE MTM5400 Mobile Terminal Installation Manual SCOPE Scope of This Manual This manual is intended for use by service technicians familiar with similar types of equipment. It contains information required for the installation of the equipment described and is current as of the printing date.

  • Page 14: Mtm5400 Manuals And User Guides

    Installation Instructions 68015000181 MTM5400 Installation Manual (English) 68015000603 MTM5400 Installation Manual (English/German) Service Manual 68015000183 MTM5400 / MTM800 FuG Basic Service Manual EMEA (English) 68015000587 MTM5400 Basic Service Manual APAC (English) Quick Start Guides 68015000289 MTM5400 Quick Start Guide (English)

  • Page 15: Warranty And Service Support

    In instances where the product is covered under a "return for replacement" or "return for repair" warranty, a check of the product should be performed prior to shipping the unit back to Motorola. This is to ensure that the product has been correctly programmed or has not been subjected to damage outside the terms of the warranty.

  • Page 16: Service Information, Europe, Middle East And Africa Region, Emea Systems Support Centre (essc)

    MTM5400 Mobile Terminal Installation Manual SCOPE Service Information Europe, Middle East and Africa Region EMEA Systems Support Centre (ESSC) The EMEA Systems Support Centre provides a remote Technical Support Service to help customers resolve technical issues and quickly restore networks and systems. This team of highly skilled professionals is available to customers with current service agreements in place that include the Technical Support Service.

  • Page 17: Parts Identification And Ordering, Emea Test Equipment Support, Your Input, Updated Versions Of This Manual

    Online at https://emeaonline.motorola.com. EMEA Test Equipment Support Information related to support and service of Motorola Test Equipment is available by calling the Motorola Test Equipment Service Group in Germany at +49 (0) 6128 702179, Telefax +49 (0) 6128 951046, through the Customer Care Organization of Motorola’s local area representation, or via the Internet at...

  • Page 18: Asia, Pacific Region, Piece Parts, Technical Support, Further Assistance From Motorola, Parts Identification And Ordering

    Aftermarket and Accessory Division (AAD). If no part number is assigned, the part is not normally available from Motorola. If a parts list is not included, this generally means that no user-serviceable parts are available for that kit or assembly.

  • Page 19: Latin America Region

    If a 58212-901-4600 complete Motorola part number is assigned to the part, it is available from Motorola. If no part MOTOROLA DO BRASIL LTDA. number is assigned, the part is not normally Av. Chedid Jafet available from Motorola.

  • Page 20

    MTM5400 Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...

  • Page 21: Model Information & Accessories, Mtm5400 Mobile Terminal Model Information, Sales Model Nomenclature

    MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Model Information This manual applies to the following Mobile Terminal Models Type No. Sales Model No. Short Description Model MT953C M83PFS6TZ5AN MTM5400 380-430MHz, DASH...

  • Page 22: Model Specifications, Model Descriptions

    MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES Model Specifications* GENERAL RECEIVER TRANSMITTER π ETSI: ETS 300 394-1 Receiver Type: Direct Modulation Type: /4DQPSK ETS 300 489-1 Conversion Type Number: Frequency Range: RF Power: MTM5400 380-430 MHz MT953C MTM5400...

  • Page 23: Accessories-to-model Chart

    MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Installation Manual Accessories-to-Model Chart ACCESSORIES Control Heads Part Number Control Head, Roman Keypad PMWN4009 Control Head, Arabic Keypad PMWN4012 Control Head, Cyrillic Keypad PMWN4014 Control Head Hungarian Keypad PMWN4015 Control Head Hebrew Keypad...

  • Page 24

    MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES ACCESSORIES Desktop Tray without Loudspeaker GLN7318 Desktop Tray with Loudspeaker RSN4005A Desktop Power Supply HPN4007C Desktop Power Supply GPN6145B Power Cable (For Desktop Power Supply HPN4007C) Part Number US Linecord (3060665A04) Packed...

  • Page 25

    MODEL INFORMATION & ACCESSORIES MTM5400 Mobile Terminal Installation Manual ACCESSORIES DIN Mount Bracket PMLN5093 Programming/Data Part Number USB Programming Cable (Terminal Rear Port) PMKN4110 Programming Cable PMKN4105 PMKN4104 Active Data Cable USB Programming Cable (Mobile Microphone Port) HKN6184 Antennas (sold with terminals) Part Number Antenna Whip Tetra Hinged 380 –...

  • Page 26

    MTM5400 Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES this can be achieved by installing (P/N: 01015001001) as shown in kit leaflet. The specific configuration can be tested using the following technique: The test requires a second radio in a quiet place or cooperation with a dispatcher.

  • Page 27: Introduction, General Information, Installation

    Only the specified Motorola parts in this manual should be used. Failure to do so could result in non compliance to the Automotive Directive (72/245/EEC, as amended by 95/54/EC).

  • Page 28: Dc Power Cable Installation, Installation Planning

    MTM5400 Mobile Terminal Installation Manual INSTALLATION In a vehicle with an airbag, make sure that the mounting location of the mobile terminal, or of any terminal accessory, is not in the deployment path of the air bag. Uninstaling the radio OPTION 1: Before disconnecting the 13.2 V main power supply from...

  • Page 29: Installation Procedure

    INSTALLATION MTM5400 Mobile Terminal Installation Manual In cases of blown fuses, replace ONLY with those of identical value. NEVER insert ones of different values. Installation Procedure Begin the DC power cable installation as follows: Determine a routing plan, keeping in mind where the terminal is to be mounted and make sure that the cable does not rest on sharp edges.

  • Page 30

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Fuse (10 A) Fuse Holder Adapter Cover Red Lead Red Lead Red Lead (min. 2.5 mm (min. 2.5 mm Mounting Hole Ring Lugs Black Lead (min. 2.5 mm To Battery - To Battery +...

  • Page 31: Terminal Installation, Enhanced Control Head Installation

    The Enhanced Control Head may then be turned to provide the most convenient access. To reposition the Enhanced Control Head: Insert the dismantling tool (Motorola P/N 6686119B01 in the groove between the Enhanced Control Head and the terminal assembly as shown in the figure below.

  • Page 32: Trunnion Installation, Installation Planning

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Trunnion Installation Installation Planning The trunnion allows the terminal to be mounted to a variety of surfaces. The trunnion must be securely fixed to the vehicle chassis. Ensure the surface can support the weight of the terminal.

  • Page 33

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Installation Procedure Select either the transmission hump or an open underneath portion of the dash to mount your terminal (see Figure 6). When mounting the trunnion on the transmission hump, be careful that the transmission housing is not affected.

  • Page 34: Dashboard Installation, Installing The Radio In An Automotive Dashboard

    MTM5400 Mobile Terminal Installation Manual INSTALLATION TRANSMISSION HUMP MOUNTING Wing Screw Trunnion Mounting Mounting Bracket Surface 28 mm (1.12") 46 mm 46 mm (1.84") (1.84") 73 mm 73 mm (2.92") (2.92") BELOW DASH MOUNTING Mounting Surface Wing Screw Sheet Metal...

  • Page 35: Mounting The Radio In The Frame

    INSTALLATION MTM5400 Mobile Terminal Installation Manual tabs, using all 6 where possible, to hold it in place. The tabs are easily bent back by twisting a large flat- bladed screwdriver into the slot behind the tabs. For a more secure installation the top and rear of the frame should also be secured with screws.

  • Page 36

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Table 2 Components DIN Mount Kit Item Description Part Number DIN Mount Kit PMLN5094 Demount Tool 8166514A01...

  • Page 37: Remove The Radio From The Frame

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Remove the Radio from the Frame Remove both rubber side caps from the Enhanced Control Head. Insert the demount tool into the two openings as shown in Figure 8 below. Figure 8 Removing the Radio from the Frame Push the demount tools through the openings in the frame.

  • Page 38: Desktop Installation, Planning, Installation

    INSTALLATION Desktop Installation The MTM5400 may be desktop mounted. The Desktop Station option provides the terminal with the desk microphone, power supply, desk top tray (without speaker) and external loudspeaker. If an outdoor antenna is used a proper grounded Lightning...

  • Page 39

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Wall Outlet Line Cord with Ground Power Supply Outdoor Antenna Lightning Protector with Quarter-Wave 12 V Desktop Shorting Stub Power Cable Speaker Desk Microphone Antenna Indoor Antenna Cable Antenna Connector BNC Figure 9 Desktop Mounting (See Table 3 for Part Numbers)

  • Page 40: Remote Mount Installation

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Remote Mount Installation Remote Mount Cable Transceiver 10-Pin Connector 10-Pin Connector Remote Head Enhanced Remote Mount Enhanced Control Head Data Expansion Head Enhanced Figure 10 Remote Mount Installation with Remote Head Enhanced/Data Expansion Head Enhanced...

  • Page 41

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion Slide the Remote Mount Enhanced Control Head onto the mounting trunnion until it snaps into place. Tighten the screws at both sides of the trunnion. After a few turns, tilt the control head for an optimum view of the display.

  • Page 42: Installing The Remote Mount Enhanced Control Head In A Din Mount Bracket

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket Slide the Remote Mount Enhanced Control Head onto the DIN Mount Bracket until it snaps into place. Tighten the screws at both sides of the DIN Mount Bracket.

  • Page 43: Din Frame

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the relevant fixing tabs. Use all 6 tabs, if necessary, to hold it in place.

  • Page 44: Adding Extra Connectivity To The Remote Head, Installing The Accessories Expansion Cable

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Adding Extra Connectivity to the Remote Head The Accessories Expansion Cable (PMKN4029) allows users to have extra connectivity to accessories via the Mobile Microphone Port (MMP) and USB port. Accessories Expansion Cable (PMKN4029) Mobile Microphone Port/USB Port Module...

  • Page 45: Motorcycle Mount Enhanced Control Head Installation, Planning

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Motorcycle Mount Enhanced Control Head Installation Be advised, the motorcycle installation is not applicable to 260–275 MHz terminals. Figure 15 Motorcycle Mount Enhanced Control Head - Front Side The keypad labelling of the control head may vary according to the specific customer/country concerns.

  • Page 46: Installing The Motorcycle Mount Enhanced Control Head

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Verify that the antenna cable is routed in the shortest way to minimize power loss over the cable. Check that the mounting surfaces are able to support the weight of the units. If an additional GPS antenna or a combined TETRA/GPS antenna is used, the antenna housing carries the GPS receiver.

  • Page 47

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Figure 17 Upward Movement Figure 18 Downward Movement...

  • Page 48: Mechanical Parts, Installation Of The Motorcycle Mount Telco Cable (pmkn4030)

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Mechanical Parts Figure 19 Motorcycle Mount Enhanced Control Head Mounted in a Trunnion Table 7 Motorcycle Mount Enhanced Control Head - Mechanical Parts List for Installation Item Description Part Number Motorcycle Mount TELCO Cable PMKN4030 2 &...

  • Page 49: Data Expansion Head Enhanced Installation, Data Expansion Head Enhanced Radio Without Control Head

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Data Expansion Head Enhanced Installation Data Expansion Head Enhanced Radio without Control Head The Data Expansion Head Enhanced can be used without a control head. This configuration allows the use of the radio without any control head, allowing the radio to be powered on via the ignition switch.

  • Page 50: Data Expansion Head Enhanced With 3rd Party Control Head

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Data Expansion Head Enhanced with 3rd Party Control Head The Data Expansion Head Enhanced can be used with a “virtual head” on a PC or a third party control head. This configuration allows the controlling of the radio (Transceiver Box) with a Control Terminal (for example: Personal Computer, Laptop, Console, and so forth).

  • Page 51: Data Box Radio

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Data Box Radio This configuration allows the controlling of the radio (Transceiver Box) via PEI (for example: Personal Computer, Laptop, Console, and so forth) with AT Commands (recommended) or TNP1 protocol from a Control Terminal.

  • Page 52: Junction Box Installation, General, Installation

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Junction Box Installation Speaker to Terminal Accessory Connector External PTT To Ignition Connecting cable switch PMKN4103 - 2m F2 4A PMKN4102 - 4m External PMKN4101 - 6m alarm Emergency switch Fist Microphone GMMN4063 Junction Box...

  • Page 53: Service, Connections

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Service The junction box PCB is not repairable. Please order a new junction box as necessary. Connections Connect all accessories to the junction box. If it is required please see “Re-crimp Procedure” on page 61to be able to connect your accessory.

  • Page 54: Connection Plan For The Junction Box Accessory Terminal

    MTM5400 Mobile Terminal Installation Manual INSTALLATION 4 = Connector for programming cable FLN 9636 This is a legacy connector which currently is not supported. For programming the transciever, use PMKN4105A programming cable that is connected directly to the transciever. 5 = Connector for accessory connector...

  • Page 55

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Connection Plan for the Alarm Relay BUZZER RED +12V ALTERNATIVE +12 V External alarm ALARM RELAY +12 V +12 V ALTERNATIVE JUNCTION BOX TERMINAL ALARM RELAY +12 V +12 V Connection Plan for the Emergency Switch...

  • Page 56: Connection Plan For Accessory Connector Kit (hln9457)

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Connection Plan for External PTT version a) version b) JUNCTION BOX TERMINAL Connection Plan for Accessory Connector Kit (HLN9457) Part Number/Description Cable Connectivity RSN4002A Speaker 13W SPKR- 9 GMSN4078 Speaker 5W SPKR+ 10 RLN4857 Push button PTT...

  • Page 57

    Radios with Data Expansion Head Enhanced To use a junction box with one of the MTM5400 mobile terminals fitted with a Data Expansion Head Enhanced, always use the 9-pin RS232 port on the Data Expansion Head Enhanced for PEI instead of the 9-pin RS232 port on the junction box (connector 6).

  • Page 58: Connectors And Pin Assignment Of The Radio, Transceiver Rear Side - Pin Function

    Figure 25 Location of Accessory Connector - Rear Side This section gives a description of the Accessory Connector pin functions. The accessory connections shown are not compatible to some other models of Motorola radios. Check the appropriate accessory or technical manual for further information.

  • Page 59

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Table 9 26-Pin Accessory Connector Function Description RX_AUDIO RX audio output MIC2 MIC2 for noise cancelling dual mic input GND_MIC Ground (for MIC) EXTERNAL_PTT PTT input (pulled via 4K7 to 5V) UART2_DTR / RS232 or UART1 / UART2 DTR / 2nd USB2.0 (OTG) ID...

  • Page 60: Accessory Connection Plan

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Accessory Connection Plan The accessory connections shown are not compatible to some other models of Motorola radios. Check the appropriate accessory or technical manual for further information. Ensure correct position of the accessory connector.

  • Page 61: Re-crimp Procedure

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Re-crimp Procedure In order to use accessories (RLN4858 and GKN6272) with the rear connector of the radio, please follow the re-crimp procedure using the crimp pins provided with PMLN5072 connector kit. These accessories do not require to be re-crimped when used with the Junction Box GMLN5089.

  • Page 62: Remote Head Enhanced, Pin Telco Connector

    Data Expansion Head Enhanced: a) The 10-pin TELCO connector can be used to connect a customized adapter, for example, for connecting the helmet including microphone/earpiece (non-Motorola accessory) or an external PTT. The customized adapter will be connected via the cable RKN4077.

  • Page 63: Pin Subd Connector

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Table 10 10-Pin TELCO Connector Function Description Audio + Balanced Audio + (Bidirectional) Not Connected BUS+ This is used for communication between the radio and an Enhanced Control Head. Audio- Balanced Audio - (Bidirectional)

  • Page 64

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Table 11 25-Pin subD Connector Function Description ON_OFF_CONTROL / • Switch into flash mode (connect pin14 with 6) FLASH_MODE • On/Off control for Std. Control Head • INT_MIC Microphone analogue input of 80mV , 600ohm impedance, 9V...

  • Page 65: Connector And Pin Assignment Of The Enhanced Control Head

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Connector and Pin Assignment of the Enhanced Control Head Flex Pin 12 Cable Front View of the Mobile Microphone Port (MMP) Connector Figure 28 View of the Enhanced Control Head’s Mobile Microphone Port Connector and Flex Cable The keypad labelling of the control head may vary according to the specific customer/country concerns.

  • Page 66

    MTM5400 Mobile Terminal Installation Manual INSTALLATION 10-Pin Telco Connector 25-Pi n Back Connector Figure 29 View of the Enhanced Control Head’s rear connectors Table 14 10-Pin Telco Connector Telco Connector Pin Function Description AUDIO + Balanced Audio + (Bidirectional) Not Connected...

  • Page 67

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Table 15 25-Pin Back Connector Back Connector Function Description Default GPIO_9 GPIO Output: Active for duration of call (car radio mute) GPIO_6 GPIO PTT Input, TX audio from MIC_REAR_2 GPIO_8 GPIO Disabled GPIO_3 GCAI PIN 2...

  • Page 68: Connecting Cables, Head Enhanced (motorcycle Mount Telco Cable)

    MTM5400 Mobile Terminal Installation Manual INSTALLATION Connecting Cables Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable) Part Number: PMKN4030 Length: 2.3 m (7.55 feet) Figure 30 Connecting Cable - Motorcycle Mount TELCO Cable...

  • Page 69: Accessories (accessories Expansion Cable)

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable) Part Number: PMKN4029 Mobile Microphone Port subD Connector USB Connector Figure 31 Connecting Cable - Accessories Expansion Cable Table 16 Accessories Expansion Cable, Connector Pin Function...

  • Page 70

    MTM5400 Mobile Terminal Installation Manual INSTALLATION USB A JACK Signal subD 25 Pos BROWN / WHITE RED / WHITE ORANGE / WHITE Power On RED / BLACK Headset YELLOW / WHITE Ground...

  • Page 71: Radio-to-junction Box

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Radio-to-Junction Box Part Number: PMKN4101 Length: 6 m (19.69 feet) TERMINAL ACCESSORY CONNECTOR JUNCTION BOX CONNECTOR 26-Pin AMP 20-Pin subD Wire From Wire Colour (Signal Name) Gage (Signal Name) USB_D+ USB_D- USB_VBUS GND (USB)

  • Page 72: Data Expansion Head Enhanced Radio-to-data Device

    Data Expansion Head Enhanced Radio-to-Data Device This is a standardized RS232 cable (will not be provided by Motorola). Use the 9-pin socket on the front side of the Data Expansion Head Enhanced Radio to connect this cable with the data device.

  • Page 73: Data Expansion Head Enhanced Radio-to-fist Microphone, Operation, Making Connections, Removing The Existing Coiled Cord Cable

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Data Expansion Head Enhanced Radio-to-Fist Microphone The GMKN4072 Connecting Cable replaces the existing coiled cord cable of the fist microphone (Motorola P/N: GMMN4063). The GMKN4072 originally is terminated with a 20-pin connector. Use the PMLN5072 accessory connector kit to re- crimp it.

  • Page 74

    MTM5400 Mobile Terminal Installation Manual INSTALLATION to Accessory to Microphone Connector Housing PTT (white) EXT_MIC (blue) GND (black) GND (black) EXT_MIC (blue) HOOK (red) EXT_PTT (white) HOOK (red) Figure 34 Pin Assignment of Cable from Accessory Connector to Microphone Housing...

  • Page 75: Radio-to-data Device: Active Data Cable, Cable Connectivity

    INSTALLATION MTM5400 Mobile Terminal Installation Manual Radio-to-Data Device: Active Data Cable The PMKN4104 Active Data Cable provides a 5-wire RS232 interface (for example, RxD, TxD, CTS, RTS, DTR) between a computer and a mobile radio. The cable has to be connected to the 26-pin Accessory Connector on the rear side of the radio and into the 9-pin connector of a Data Device (for example, PC, Laptop, console).

  • Page 76: Vehicle Antenna Installation, Mobile Radio Operation And Eme Exposure, Selecting An Antenna Site

    90 Centimetres (3 Feet) If you are not sure of the rated power of your radio, contact your Motorola representative or dealer and supply the radio model number found on the radio model label. If you cannot determine the rated power out, then assure 90 cm (3 feet) separation from the body of the vehicle.

  • Page 77: Antenna Installation Procedure, Completing The Installation

    The MTM5400 mobile terminal has the option of a GPS board. If a GPS or combined TETRA/GPS antenna is used, make sure that the antenna has a clear view to the sky and that the antenna base which carries the GPS receiver is not covered with any metallic or radio frequency absorbing material.

  • Page 78: External Speaker Installation

    MTM5400 Mobile Terminal Installation Manual INSTALLATION External Speaker Installation Remove the speaker from the trunnion bracket by loosening the two wing screws. Choose a place to mount the speaker. When mounting the trunnion on the transmission hump, be careful that the transmission housing is not affected.

  • Page 79: Product Specific Information, Equipment Electrical Ratings, Normal Load Conditions, Appendix

    PRODUCT SPECIFIC INFORMATION MTM5400 Mobile Terminal Installation Manual APPENDIX Product Specific Information for Digital Terminals Type MT953C This section gives the Service Personnel an overview about product specific notes. This is necessary to take special precautions to avoid the introduction of hazards when operating, installing, servicing or storing equipment.

  • Page 80: Fuse Identification

    MTM5400 Mobile Terminal Installation Manual PRODUCT SPECIFIC INFORMATION Fuse Identification In case of blown fuses during the installation replace ONLY with those of identical value. Never insert ones of different values. Fuse for Power Cable GKN6270/GKN6274: 10 A (Motorola Part Number: 6500139767)

Comments to this Manuals

Symbols: 0
Latest comments: