Pci Hot Plug Boards; Exploded Views - HP D5970A - NetServer - LCII Service & Reference Manual

PCI Hot Plug Boards

The PCI Hot Plug option is Network Operating System (NOS) dependent. To use the Hot Plug option, the
PCI board must have a hot plug compliant driver and a Hot Plug Utility must be loaded for the respective
NOS. The Hot Plug Utility is used to turn power off/on to the PCI slot, while the HP NetServer continues to
operate normally. If the hot plug compliant driver and the Hot Plug Utility are not loaded during the
configuration process (NOS installation), you will not be able to use the Hot Plug option until the utility and
drivers are loaded. Refer to the respective NOS and HP NetServer Hot Plug Help files to load the Hot Plug
Utility and hot plug compliant drivers and then initialize the driver(s) if it is not done automatically. To access
the PCI Hot Plug Replacement procedures in Information Assistant for the respective NOS, you must have
the HP NetServer Online Documentation CD-ROM provided with the HP NetServer LXr 8500.

Exploded Views

64
39 D
40 C
41 B
42 A
43 PCI Hot Plug
Interrupt
44 SCBERR#
45 A
46 NMI
47 Unused
1
2
14
Slot 1
Slot 1
Slot 1
Onboard SCSI Channel A
Embedded Devices
MAC
Slot 1
PIIX4E
N/A
3
4
6
5
8
10
12
11
13
7
9