Video Memory - Dram; Boot Device Priority; Cabling Configurations - HP D5970A - NetServer - LCII Service & Reference Manual

Video Memory - DRAM

The on-board video circuitry supports several screen resolutions. Increasing the video memory buffer size to
1 MB allows the controller to support 132-column text mode and high resolution graphics mode. Expand
video memory by installing a 256 K x 16 (512 KB), 70 Ns, 40-pin SOJ package DRAM IC. Obtain this
memory IC from a local electronics supplier.
For the Model A, the video RAM chip is not standard. The part number is 5182-9404.

Boot Device Priority

1. CD-ROM
2. Flexible Disk Drive*
3. IDE Device*
4. EISA slot - E1
5. EISA slot - E2
6. EISA slot - E3
7. EISA slot - E4
8. PCI slot - P1
9. PCI slot - P2
10. PCI slot - P3
11. PCI slot - P4
12. SCSI A connector
13. SCSI B connector
14. PCI slot - P5
15. PCI slot - P6
* Must be enabled using the EISA configuration Utility.
** If "Boot from Embedded SCSI" is set to "Onboard," using EISA Configuration Utility.

Cabling Configurations

Optional Memory Configurations for 4 GB Memory Board
**
21