Bezel; Removing The Front Bezel; Installing The Front Bezel; Front Panel I/O Device Assembly - HP Z400 - Workstation Maintenance And Service Manual

Bezel

This section describes how to remove and install the front chassis bezel.

Removing the front bezel

To remove the front bezel:
1. Remove the side access panel (see
2. Lift the release tabs
Figure 5-7

Installing the front bezel

To install the front bezel, align the tabs discussed in the previous section and rotate the bezel until it
snaps in place.

Front panel I/O device assembly

This section describes how to remove and install a front panel I/O device assembly.

Removing the front panel I/O device assembly

To remove the front panel I/O device assembly:
1. Power down the workstation (see
2. Disconnect power from the workstation (see
3. Remove the side access panel (see
4. Remove the front bezel (see
ENWW
, and then rotate the front bezel off the chassis
Removing the front bezel
Predisassembly procedures on page
Removing the front bezel on page
Removing the side access panel on page
Predisassembly procedures on page
Removing the side access panel on page
Removing and installing components
72).
.
2
69).
69).
72).
75).
75