HP Z400 - Workstation Maintenance And Service Manual page 106

6. Route the CPU power cable (P3) through the opening next to the power supply as shown in the
following figure.
Figure 5-29
7. Secure the airflow guide in the chassis.
a.
b.
94 Chapter 5 Replacing components
Routing the CPU power cable
Insert the tab on the airflow guide into the slot next to the yellow ODD release lever
then press down as shown in the following figure.
Figure 5-30 Securing the airflow guide
Ensure that the airflow guide secures even with the end of the FDD bay, and that the latch
engages with the slot in the internal bay cover.
2
, and
ENWW