Installing The System Board - HP Z400 - Workstation Maintenance And Service Manual
Hp z400 workstation maintenance and service guide
Hide thumbs
Also See for Z400 - Workstation:
- Maintenance and service manual (254 pages) ,
- Quickspecs (63 pages) ,
- Installation manual (10 pages)
Table of Contents
Advertisement
Installing the system board
To install the system board:
1.
Insert the system board with the rear chassis side of the board tilted slightly downward.
2.
Push back on the board while maintaining downward pressure on the board to clear the release
mechanism. The latch should click into place.
3.
Reinstall all removed components and cables. (Refer to
power cables.)
ENWW
Power connections on page 90
Removing and installing components 133
to identify
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
