Setting Hardware Passwords In The Hp Setup Program; To Set A Password - HP Workstation x2000 Getting Started Manual

Setting Hardware Passwords in the HP Setup Program

Setting Hardware Passwords in the HP Setup
Program
You can set hardware passwords to provide different levels of protection
for your Workstation: the Administrator password and the User
password. You set these passwords using the
program.
The Administrator can access and change all settings in the Setup
program, while the User can only access and modify certain items in the
Main menu.

To Set a Password

1. Start the Setup program.
2. Select the
Security
3. Select the
Administrator
4. Choose the
Set Administrator
enter your password twice.
5. To save your changes and exit the Setup program, press
, then
Exit Menu Exit Saving Changes
To remove the password, follow the same procedure as to set a password.
You will be asked to enter the existing password first. Then, for the new
password, leave the password field blank and press
your choice, press
Enter
Chapter 1
Setting Up and Using Your Linux Workstation
menu.
or password submenu.
User
or
User Password
.
a second time.
menu in the Setup
Security
setup item. You must
or select
Esc
. To confirm
Enter
25