HP Workstation x2000 Getting Started Manual page 53

Table 3-2 Your Workstation Has a Hardware Problem
The mouse cable is correctly
connected.
You are using the correct driver. If
you are using HP's enhanced
mouse, ensure that the correct
driver is installed. This driver is
provided with all Windows 2000
preloaded systems.
You are using the latest BIOS
The mouse is clean.
The mouse itself is not defective.
If the Workstation starts but you still have a problem, run HP
e-DiagTools (refer to page 59).
Your Workstation has no sound.
Check that...
Chapter 3
Troubleshooting Your Workstation
Solving Hardware Problems
1. Switch off the Workstation
(not necessary with a USB
mouse).
2. Plug the cable into the correct
connector on the back of the
Workstation (color coding is
used for easy matching).
3. Switch on the Workstation.
Download the latest driver from
HP's Web at:
www.hp.com/workstations/support
Download the latest BIOS from
HP's Web at:
www.hp.com/workstations/support
Clean the mouse ball as shown
below.
Replace the mouse with unit that
is known to work or try the
mouse with another Workstation.
How
53