Advanced Menu; Security Menu; Boot Menu; Power Menu - HP Workstation x2000 Getting Started Manual

Linux workstation

Hide thumbs Also See for Workstation x2000:

Table of Contents

Setting Up and Using Your Linux Workstation

Conﬁguring Your Workstation

Advanced Menu

The Advanced Menu offers a list of sub-menus allowing you to:

• Conﬁgure memory caching, USB ports, Integrated I/O Ports and

Integrated Audio Devices

• Enable ﬂoppy disk drives, IDE devices (Primary and Secondary)

• Workstation Devices.

Sub-menus are presented for changing the characteristics and values of

the System Administrator Password, User Password, Power-on

Password, Fixed Disk Boot Sector and for preventing unauthorized

start-up from the Floppy, CD-ROM and IDE-HDD drives (refer to

"Setting Hardware Passwords in the HP Setup Program" on page 25).

Select the order of the devices from which you want the BIOS to attempt

to boot the operating system. The QuickBoot mode option allows the

system to skip certain tests while booting. This decreases the time

needed to boot the system.

The Network Interface option enables the system to return to normal

speed when a speciﬁc command is received by the network interface.

Setup changes system behavior by modifying the power-on initialization

parameters. Setting incorrect values may cause system boot failure.

Should this occur, press

to load the Setup default values to recover.

Chapter 1

Table of Contents