Summary - HP Workstation x2000 Getting Started Manual

Linux workstation

Hide thumbs Also See for Workstation x2000:

Table of Contents

Linux System Setup and Recovery

Conﬁguring Your Linux Workstation

Summary

This completes the miscellaneous parameters you can set from the Linux

Setup Tool window. If you want to erase the changes you have made and

keep the current conﬁguration settings, click on the "Reset

Conﬁguration" button. To see the parameters you have chosen, click on

the "Show Summary" button.

The "Show Summary" window, shown below, contains all the information

you entered. To change any choices, click OK to close the Show summary

window, and click the appropriate parameter box in the Linux Setup Tool

window.

Click "OK" to close this window.

If you are satisﬁed with all the information you have entered, click

"Save" at the bottom of the Linux Setup Tool window to save this

conﬁguration. NOTE: The system will not let you exit until you have set

the root password.

Chapter 2

Table of Contents