Setting Up and Using Your Linux Workstation
Setting Hardware Passwords in the HP Setup Program
If You Forget Your User Password
1. Switch off the Workstation.
2. Re-start the Workstation. If you are prompted for a password, enter
the Administration password.
3. When
Press F2 to Enter Setu
4. Enter the Administrator password to access the Setup program.
5. Go to the
Security
6. Go to the
Set User Password
will replace the old password which you had forgotten.
7. Press
or select
Esc
Setup.
26
p appears, press the
menu.
field and set a new User Password. This
to save the new password. and exit
Exit Menu
key.
F2
Chapter 1