Selecting From The Advanced Menu - HP nx6130 Maintenance And Service Manual

Troubleshooting

Selecting from the Advanced Menu

Select
Language (or press f2)
Boot options
Device options
2–6
Table 2-4
Advanced Menu
To Do This
Change the Computer Setup language.
Enable/Disable MultiBoot, which sets a startup sequence
that can include most bootable devices and media in the
system.
Set the boot order.
Swap the functions of the
Enable/Disable multiple pointing devices at startup. (To set
the notebook to support only a single, usually nonstandard,
pointing device at startup, select Disable.)
Enable/Disable USB legacy support for a USB keyboard,
mouse, and hub. When USB legacy support is enabled
A USB keyboard, mouse, and hub work
even when a Windows operating system
is not loaded.
The notebook starts from a bootable hard
drive, diskette drive diskette, or CD,
CD-RW, or DVD inserted into a drive
connected by a USB connector to the
notebook or to an optional docking
device.
Select a parallel port mode: EPP (Enhanced Parallel Port),
standard, bidirectional, or ECP (Enhanced Capabilities Port).
Enable/Disable all settings in the SpeedStep window.
(When Disable is selected, the notebook runs in Battery
Optimized mode.)
fn
key and left
Maintenance and Service Guide
ctrl
key.