Advanced Configuration Options Menu - HP Kayak XU 04xx Administration Manual

Advanced Configuration
Options Menu
• Enable Disconnection
To optimize SCSI bus performance, Enable Disconnection should be
set to .
Yes
• Initiate Wide Negotiation
This option determines whether the SCSI channel attempts 16-bit
data transfer instead of 8-bit data transfer.
• Send Start Unit Command
When set to
Yes
power supply by allowing the interface to power-up SCSI devices
one-at-a-time when you start your computer.
This option is not supported by some SCSI devices. Some SCSI
devices require a jumper to be changed before they can respond to
this command.
• BIOS Multiple LUN Support
More advanced SCSI devices can have several logical units (LUN).
This option determines whether booting a SCSI device that has
multiple LUNs is supported. Set this option to
has multiple LUNs. It is set to no by default.
• Include in BIOS Scan
This setting, when set to
by the host adapter with this SCSI ID. When set to
does not control the SCSI device.
It is recommended that these settings are not changed.
Plug and Play Scam Support .................................... Enabled
Extended BIOS Translation for DOS Drives > 1 GByte ............ Enabled
Reset SCSI Bus at IC Initialization............................ Enabled
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Host Adapter BIOS (Configuration Utility Reserves BIOS Space).. Enabled
Support Removable Disks Under BIOS as Fixed Disks.............. Boot Only
Display F6 Message During BIOS Initialization.................. Enabled
BIOS Support for Int13 Extensions.............................. Enabled
Use the and
display a menu with a selection of values.
this option reduces the load on your computer's
, allows the SCSI device to be controlled
Yes
Advanced Configuration Options
keys to move between options. Press
Configuring the SCSI Bus
if your boot device
Yes
, the adapter
No
English
to
5