Advanced Menu - HP Kayak XA Technical Reference Manual

Advanced Menu

The Advanced Menu does not have the same structure as the Main Menu
and Power Menu. Instead of presenting a list of fields, it offers a list of
sub-menus. The Advanced Menu contains the following sub-menus:
• Memory and Cache. Define how to configure the specified block of
memory.
• Video. Set the best ergonomic refresh rate supported by the display. This
feature, can also be used to set the preferred refresh rate for each graphic
mode.
• Flexible Disk Drives. Enable or disable the on-board flexible disk
controller.
• IDE Devices. Configure IDE Primary and Secondary devices.
• SCSI Interface. Enable or disable the integrated SCSI interface. In the
Ultra SCSI item, the Auto option will enable or disable automatically the
Ultra SCSI by the BIOS, depending on whether external SCSI devices are
detected or not.
• Integrated Network Interface. Enable or disable the integrated network
interface. This feature must be enabled when an ethernet card is installed.
• Integrated Peripherals. Enable or disable the on-board parallel and
serial ports at the specified address.
• Integrated USB Interface. Enable or disable the integrated USB
(Universal Serial Bus) interface.
• Integrated Audio Interface. Enable or disable the audio interface. This
feature is useful on non plug-and-play operating systems, because the
integrated audio chip is plug-and-play.
• PCI Devices. Enable this option if you need the BIOS to set the PCI Bus
Master bit. This could be necessary for some older PCI accessory boards.
• ISA Resource Exclusion. reserves interrupts for legacy ISA devices to
prevent conflict with PCI/PnP devices.
4 HP BIOS
HP/Phoenix BIOS Summary
75