Phase 2 - Install Hp Drivers - HP Tc2110 - Server - 128 MB RAM Installation Manual

Chapter 5
6. Insert the Netware SBS 5.1 CD, then type:
C:\>D:
D:\>INSTALL
7. Select the Appropriate Language if prompted.
8. Press F10 to Accept the License Agreement.
For both NetWare 5.1 and Small Business Suite 5/5.1
6. Press Enter to setup "a new server" then scroll down and make sure
"Continue" is highlighted.
7. At the bottom bar of the screen, you can see the key function tips. Press F3.
8. Insert the HP disk NW patch.
9. Specify the file path "A:\RESPONSE.TXT", press Enter.
10. Press Enter to continue.
11. Modify or accept the server settings, the regional settings, as well as the
mouse and video configuration.
PHASE 2 – Install HP Drivers
1. The installation program then detect your hardware and attempt to match the
drivers to the hardware. It displays a driver summary screen.
2. If you have an IDE system, press Enter to continue. If you have a SCSI
model, you need to install the HP SCSI driver (the SCSI driver proposed by
default by NetWare does not install properly):
a. Scroll down to chose Modify and press Enter.
b. Scroll down to highlight the "Storage Adapters" item and press Enter.
c. The installation program displays the drivers detected: a SCSI driver and
a generic ATA/IDE/ATAPI Adapter driver (IDEATA.HAM). Press
Delete to remove the default SCSI driver. The only remaining driver
should be the IDEATA.HAM driver.
NOTE Do NOT remove the IDEATA driver because it is used by the
CD-ROM Drive.
d. Insert HP disk NW SCSI (created with the Startup CD) in the floppy
drive.
40
Installing Novell NetWare 5.1 and Novell Small Business Suite 5.1