Section 3. Run Hp Diagtools; Section 4. Using The Startup Cd - HP Tc2110 - Server - 128 MB RAM Installation Manual

Chapter 2

Section 3. Run HP Diagtools

To perform HP Diagtools hardware diagnostic on your HP Server tc2110, switch
off your HP server then reboot on the Startup CD and follow the on-screen
instructions. View and save the hardware inventory after the test.

Section 4. Using the Startup CD

The Startup CD included with your HP Server tc2110 system may be used as
follows:
Startup CD Usage
Method 1
Insert CD in your new
HP server and reboot it.
This will run HP
Diagtools (a DOS
program)
* This method is not available on NetWare servers since they don't have an HTML browser.
4
Preparing your HP Server tc2110 for your NOS installation
Method 2
Insert the CD in a PC
that includes a HTML
browser.
Open the file
startup.htm.
This allows you create
drivers diskettes (HTML
menus)
Method 3
Insert the CD in the server
once the NOS is
running.*
Open the file startup.htm.
This allows you create
drivers diskettes and
provides an automated
installation of Windows
NT or 2000 video drivers
(HTML menus).