Phase 6 - Install The Service Pack - HP Tc2110 - Server - 128 MB RAM Installation Manual

Chapter 3
5. When prompted, insert the blank formatted disk to create the Emergency
Repair Disk then click OK.
6. When prompted, remove the Emergency Repair disk and the Windows NT
Server CD-ROM from their drives and reboot the system by pressing Enter.
7. The Windows NT logon screen will show after the POST, as the basic
Windows NT installation is now complete.
NOTE Windows NT installation may take a while at this step if you
selected NTFS and the system has to convert the boot partition
from FAT to NTFS.
PHASE 6 – Install the Service Pack
1. How to get a copy of Windows NT 4.0 Service Packs:
If your HP server is already connected to internet, you can download the
o
latest Service Pack from Microsoft website at
http://www.microsoft.com/ntserver/nts/downloads/recommended
If you have access to a PC connected to internet and equipped with a
o
CD-RW drive, you may download the latest Service Pack from Microsoft
website at
http://www.microsoft.com/ntserver/nts/downloads/recommended then
copy the Service Pack on a CD-ROM. It allows you to install the Service
Pack from the CD-ROM drive of your HP server.
You may contact Microsoft Support at (800) 936 5900 or (800) 426 9400
o
to have a Service Pack CD-ROM shipped to you.
2. To install the Service Pack, login on your HP server as the Administrator,
then run the Service Pack.
3. Select "Accept the License Agreement" then click Install.
4. When prompted, click Restart to reboot your system (remember to remove all
diskettes and CD-ROM from their respective drives).
NOTE When installing the service pack, answer No if prompted to
overwrite drivers files, to keep the HP drivers you have
previously installed.
Installing Microsoft Windows NT 4.0 Server
11