Installing Turbolinux Server 6.5; Prepare The Installation; High Level Process Flow; Perform Turbolinux Installation - HP Tc2110 - Server - 128 MB RAM Installation Manual

Network operating system

Hide thumbs Also See for Tc2110 - Server - 128 MB RAM:

Table of Contents

8 Installing TurboLinux Server 6.5

Please refer to the Chapter 1 "Preparing your HP Server tc2110 for your NOS

installation" for our recommendations on the server preparation.

Then gather the following material:

· HP Server tc2110 Startup CD

· TurboLinux Server 6.5 CD-ROM

· A blank 3.5-inch diskette, labeled TurboLinux 6.5 Boot Disk (Optional)

· Two or more clients for testing purpose (Optional)

1. Perform TurboLinux 6.5 installation.

2. Install additional HP accessories.

Section 1. Perform TurboLinux Installation

PHASE 1 – Launch the Installation

1. Turn on the server and insert the Turbolinux Server 6.5 CD-ROM.

2. Press Enter to start installation.

3. Wait as the system prepares for the installation.

4. Choose your language then press Enter to proceed with the installation.

PHASE 2 – Configure the Server

The installation program now displays a graphical interface. You can proceed

through the customization of your installation.

Please note the following recommendations:

· HP recommends using the default Install Class, which is Standard Install.

Table of Contents