Section 2. Perform Windows 20000 Installation - HP Tc2110 - Server - 128 MB RAM Installation Manual

Chapter 4 Installing Microsoft Windows 2000 Server and Small Business Server 2000
2. Insert your HP Startup CD in a Windows PC and follow the on-screen
instructions to create the Windows 2000 SCSI driver diskette (HP disk W2K
SCSI).
NOTE If the Windows PC does not auto-start the Startup menu, start it
by opening Startup.htm found at the root level of the Startup
CD.

Section 2. Perform Windows 20000 Installation

NOTE
Though you may install Windows 2000 from Setup diskettes or
directly from Windows 2000 CD-ROM, we recommend you
the second method because it is faster.
1. Boot your new server from the Windows 2000 CD-ROM.
2. You will see a message that reads "Setup is inspecting your hardware
configuration". Then the setup screen will be displayed.
3. The system will briefly show at the bottom of the display:
Press F6 if you need to install a third party SCSI
or RAID controller
If you have a SCSI model:
a. Press S to specify additional SCSI adapters.
b. When prompted, insert the HP disk W2K SCSI you created from
tc2110 startup CD.
c. Press Enter to continue.
d. Select the "Adaptec Ultra 160 Family PCI SCSI Controller Win
2000", then press Enter
NOTE
Unfortunately Windows 2000 setup only gives you a very short
time to press F6. If you missed it, you should reboot your
system and resume from step 1 above.
4. Press Enter to continue at the "Windows 2000 Server Setup - Welcome to
Setup" Screen.
20