HP Tc2110 - Server - 128 MB RAM Installation Manual page 53

Chapter 6
5. If you accept erasing all data on your disk, select Continue. Then press any
key for your system to create the partition, reboot, and format that partition.
6. Press F10 to "Accept License Agreement".
For Small Business Suite 6.0
1. Boot your HP Server on a DOS bootable utility diskette.
NOTE You can boot from the NetWare SBS 6 License diskette.
Novell DOS 7 and all required DOS utilities (FDISK,
FORMAT, EDIT) are included on the diskette.
2. Type FDISK to create a 1000 MB primary DOS partition on the primary
drive (C:). Remember to make it the active (bootable) partition. The
computer will restart and boot on the DOS bootable utility diskette again.
3. Format and transfer DOS system files to the partition by typing:
A:\>FORMAT C: /X /S
A:\>FORMAT C: /S
4. Insert the HP disk NW SCSI (created with the Startup-CD) and type:
A:\>PREPARE
to automatically create new directories, copy the necessary drivers and
configure the DOS boot.
5. Remove the diskette and reboot the server.
6. Insert the Netware SBS 6.0 CD, then type:
C:\>D:
D:\>INSTALL
7. Select the Appropriate Language if prompted.
8. Press F10 to Accept the License Agreement
For Both NetWare 6.0 and Small Business Suite 6.0
1. Change the prompt from Express to Custom, and keep the default New server
option; scroll down and choose Continue.
Installing Novell NetWare 6.0 and Novell Small Business Suite 6.0
when using NetWare DOS utility
when using MSDOS utility
47