Section 3. Perform Netware 6.0 Or Sbs 6.0 Installation; Phase 1 - Start The Installation - HP Tc2110 - Server - 128 MB RAM Installation Manual

Chapter 6
2. Insert your HP Startup CD in a Windows PC and follow the on-screen
instructions to create the HP Server tc2110 NetWare SCSI drivers (HP disk
NW SCSI).
NOTE If the Windows PC does not auto-start the Startup menu, start it
by opening Startup.htm found at the root level of the Startup
CD.
Section 3. Perform NetWare 6.0 or SBS 6.0
Installation
The installation of NetWare 6.0 or SBS 6.0 contains several phases:
· Phase 1 – Start the Installation
· Phase 2 – Install HP Drivers
· Phase 3 – Configure the Network
PHASE 1 – Start the Installation
NOTE If your hard drive contains data or is not new, HP recommends
to use a utility such as fdisk to erase all data and partitions
from your hard drive.
For NetWare 6.0
NOTE The NetWare NOS installation contains a known software
error (not product-specific) that does not allow you to boot
from CD-ROM. To work around this problem, boot from a
DOS diskette and create a bootable DOS partition on the drive.
1. Insert the Novell NetWare 6.0 or SBS 6.0 CD-ROM and boot the system.
2. Press Enter to read the license agreement then press Esc, and select "Accept
License Agreement".
3. Press Enter to "Create a New Boot Partition".
4. HP recommends to modify "Size of boot partition" to create a 1000MB boot
partition.
46
Installing Novell NetWare 6.0 and Novell Small Business Suite 6.0