HP Tc2110 - Server - 128 MB RAM Installation Manual page 49

Network operating system
Hide thumbs Also See for Tc2110 - Server - 128 MB RAM:
Table of Contents

Advertisement

Chapter 5
4. At the system console prompt enter the command:
cdrom
5. Wait for about 15 seconds for the CD to be automatically mounted as a
volume. Note the volume name (example: "NW51SP1").
6. Type:
nwconfig
NetWare Configuration Tool will open.
7. Scroll down to select "Product Options".
8. Scroll up to select "Install a Product Not Listed".
9. Press F3 and specify the path, including the volume name
(for example, "NW51SPx:\", where x = version of support pack).
10. Press F10 to accept the default installation options.
NOTE
If you want to be able to uninstall the Support Pack later, you
must select the option to back up files.
11. Read NetWare warnings (recommends avoiding installation during peak
hours) and follow on screen instructions.
12. The system will automatically restart the GUI upon completion of the
Support Pack installation.
Section 5. Install Additional HP Accessories
The hp server tc2110 Startup CD includes the drivers for the following HP
accessories:
· HP-Intel 10/100 LAN
· HP NetRAID-1M adapter
· HP Surestore DAT24i
Please refer to the product manual enclosed with your accessory for the detailed
installation procedures.
Installing Novell NetWare 5.1 and Novell Small Business Suite 5.1
43

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tc2110 - Server - 128 MB RAM and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents