Section 2. Create Microsoft Windows Nt Installation Diskettes; Section 3. Perform Windows Nt Installation - HP Tc2110 - Server - 128 MB RAM Installation Manual

Chapter 3
HP Server tc2110 Windows NT SCSI driver (HP disk NT SCSI)
o
HP Server tc2110 Windows NT LAN driver (HP disk NT LAN #1 and #2)
o
NOTE
If the Windows PC does not auto-start the Startup menu, start it
by opening Startup.htm found at the root level of the Startup
CD.
Section 2. Create Microsoft Windows NT
Installation Diskettes
Three installation diskettes are required to install Microsoft Windows NT 4.0 on
your server. Follow these steps to create these installation diskettes:
1. Locate three blank, formatted 3.5" diskettes.
2. Insert your Microsoft Windows NT 4.0 CD-ROM into a desktop PC.
3. From a DOS prompt, type:
C:\D:\i386\winnt32 /ox
(where D is the drive letter for the CD-ROM)
4. Follow the prompt and insert the diskettes in the order described.

Section 3. Perform Windows NT Installation

The installation of Windows NT contains several phases:
· Phase 1 – Driver(s) Installation
· Phase 2 – Hard Drive Preparation
· Phase 3 – System Configuration Details
· Phase 4 – Configuring the Network
· Phase 5 – Completing the Installation
· Phase 6 – Install the Service Pack
· Phase 7 – Install the HP Video Driver
6
Installing Microsoft Windows NT 4.0 Server