Installing Thin Client Options; Installing The Usb Device - HP vc4820T - Thin Client Troubleshooting Manual

2. Slide the panel toward the bottom of the unit until the cover is flush with the bottom panel of the
chassis (2).

Installing Thin Client Options

Various options can be installed on the thin client:
●
Installing the USB Device on page 13
●
Removing and Replacing the Battery on page 14

Installing the USB Device

Before beginning the replacement process, review
on page 8 for procedures you should follow before and after installing or replacing hardware.
Insert the USB device into the USB port in the secure USB compartment. See the following
▲
illustration for the location of the ports in the secure USB compartment.
Figure 2-6 USB ports in the secure USB compartment
General Hardware Installation Sequence
Installing Thin Client Options 13