Installing Thin Client Options; Flash Memory Upgrade - HP T5720 - Compaq Thin Client Hardware Reference Manual

Hardware upgrades

Installing thin client options

Flash memory upgrade

Ä
✎
✎
2-4
The t5720/t5725 thin client offers several options, including flash
memory, SODIMMs, and security hardware. For more information
about security hardware, see
view and order available options, visit the HP Web site at
http://h18004.www1.hp.com/products/thinclients/options
/index.html.
The following sections contain general installation instructions for
some of the available options. In all cases, see the specific installation
instructions that came with the thin client option.
Before beginning the installation process, review
installation sequence" on page 2-1
before and after installing or replacing hardware.
Use the following procedure to upgrade or replace flash memory.
CAUTION: If necessary, back up any data before continuing the
installation.
In addition to following these instructions, follow the detailed
instructions that accompany the flash memory.
1. Complete steps 1 through 4 of the
sequence" on page
2. Remove the existing flash memory.
You may need needle-nose pliers to remove the flash memory
module.
www.hp.com
Appendix B, "Security
for procedures you should follow
"General hardware installation
2-1.
provisions". To
"General hardware
Hardware Reference Guide