HP st5742 - Streaming Client Troubleshooting Manual page 41
Thin clients and streaming thin clients
Hide thumbs
Also See for st5742 - Streaming Client:
- Specifications (2 pages) ,
- Quick setup and getting started manual (56 pages) ,
- Hardware reference manual (43 pages)
Table of Contents
Advertisement
If you are running in a Linux environment go to step 3.
2.
If you are running in a Microsoft RIS PXE environment press the
service boot as soon as the DHCP IP information appears on the screen.
If the unit does not boot to the network the server is not configured to PXE.
If you missed the F12 cue, the system will try to boot to the ATA flash that is not present. The
message on the screen will read: ERROR: Non-system disk or disk error. Replace and press
any key when ready.
Pressing any key will restart the boot cycle.
3.
If you are running in a Linux environment an error message will appear on the screen if there is
no Client IP. ERROR: Non-system disk or disk error. Replace and press any key when
ready.
F12
key to activate the network
Troubleshooting
33
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the st5742 - Streaming Client and is the answer not in the manual?
Questions and answers