Bios Settings, (F10) Utility; Using The Bios Settings; Changing Bios Settings From The Repset Utility - HP st5742 - Streaming Client Troubleshooting Manual

4

BIOS Settings, (F10) Utility

Using the BIOS Settings

Intel Atom N280 processors and the Intel chipset are used in the HP t5740/t5745 and HP st5742/
st5747 Streaming Thin Client products.

Changing BIOS Settings from the repset utility

Some BIOS settings may be changed locally within the operating system without having to go through
the F10 utility
BIOS Setting
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Up NumLock
F12 Boot
Integrated Audio
Network Controller
Serial Port 1
Serial Port 2
Parallel Port
PWRON After PWR-Fail
Wake-on-LAN
BIOS Wake Up
Asset Tag No
Setup Password
Power-On Password
Parallel Mode
ECP Mode Use DMA
USB Controller
1 . This table identifies the items that can be controlled with this method.
Default Value
USB
Hard Drive
Network
Off
Enabled
Enabled
Enabled
3F8/IRQ4
2F8/IRQ3
378/IRQ7
Former State
Enabled
Disabled
000000000000000000
blank
blank
ECP/EPP
DMA3
Enabled
Other Values
Hard Drive, Network, Disabled
USB, Network, Disabled
Hard Drive, USB, Disabled
On
Disabled
Disabled
Disabled
Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3
Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/
IRQ3
Disabled, 278/IRQ5, 3BC/IRQ7
On, Off
Disabled
Enabled, days of the week & time
User input (18 chars)
User input (8 chars max)
User input (8 chars max)
Standard, EPP, ECP
DMA1
Disabled
Using the BIOS Settings 23