Installing a Network Card
This section contains additional expansion card information describing how to install a "10BaseT" type of network card
such as the one supplied in the HP network kit.
Caution
Installing the Card
1 Install the network card as described in steps 1 to 10 of
2 Do not turn on the computer yet as this may cause an error message to be displayed indicating that there is a problem
with the network card—which is not true.
3 Connect one end of the network cable to the back of the network card, and the other end of the cable to the network
hub.
Turning On the
4 Turn on the display and computer. Shortly after Windows 95 starts, the New Hardware Found - PCI Ethernet Controller
dialog box appears.
Computer
Static electricity can damage electronic components. Turn off all equipment. Don't let your clothes touch the
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.
Network Card
"Installing an Expansion Card" on page
Network Hub
2 Installing Accessories in Your Computer
Installing Expansion Cards
34.
39