HP Brio 80xx Upgrade Manual page 44

7 With its components facing up, place the card on a clean, flat, solid, static-free surface. Handle the card by its edges.
8 Install any new accessories.
9 Replace the expansion card if necessary (refer to steps 7, 8, and 9 of
do not replace the card, remember to replace the slot cover.
10 Reconnect the power, storage device, and front bezel fan connectors to the system board connectors. The connectors
are shaped to fit one way only (they have indexing pins). Slide the system board drawer back into the computer chassis.
11 Replace the cover. Reconnect the power cords and any telecommunications cables. Turn on the display and computer.
PS2
PS1
Indexing Pin
2 Installing Accessories in Your Computer
"Installing an Expansion Card" on page
PS
System Board
Installing Expansion Cards
34). If you
44