Installing An Expansion Card - HP Brio 80xx Upgrade Manual

Installing an Expansion Card

Static electricity can damage electronic components. Turn off all equipment. Don't let your clothes touch the
Caution
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.
1 Remove the computer's cover (refer to
2 On a table top turn the computer on to its side, with the system board closest to the surface of the table top.
3 Disconnect the power, storage device, and front bezel fan connectors shown below from the system board connectors.
System Board
Front Bezel
Fan Connector
Processor
Fan Connector
"Removing the Cover" on page
PS1 PS2
Power Connectors
(to power supply unit)
System Board
2 Installing Accessories in Your Computer
23).
CD-ROM
HDD
FDD
System Board
Installing Expansion Cards
Secondary IDE Connector
Disks E and F
Primary IDE Connector
Disks C and D
Floppy Disk Connector
Disks A and B
34