HP Brio 80xx Upgrade Manual page 53

5 Remove the metal cover plate on the shelf by bending it in and out until it breaks off. If necessary, use a flat-blade
screwdriver in the metal tab of the cover plate to help break the cover plate free.
6 Replace the front bezel on the computer.
7 Check that there are no mounting rails attached to the device. If there are mounting rails attached, remove them.
8 Insert the drive into the shelf from the front of the computer.
9 Secure the device in position using the screws provided with it.
2 Installing Accessories in Your Computer
Bend the
Metal Cover
Plate In and
Out
Metal Tab
Installing Storage Devices
53