Removing An Expansion Card - HP Brio 80xx Upgrade Manual

Otherwise, select the Configuration tab at the top of the dialog box and check that you can see the following network
components.
•
Client for Microsoft
•
Client for NetWare Networks
•
Your LAN card adapter name
•
IPX/SPX-compatible Protocol
•
NetBEUI
7 In the Primary Network Logon drop-down list box, select Client for Microsoft Networks.
8 Click the File and Print Sharing button. Select the two check boxes and click the OK button.
Restarting the
9 Shut down and then restart the computer.
Computer
10 When Windows 95 prompts you for a user name and password, enter a new user name and password. Re-enter the
password to confirm it, and click the OK button.
If you experience any problems as a result of the upgrade, refer to the online support center.

Removing an Expansion Card

You might need to remove an expansion card to install a component on it, or to improve access to components on the
system board.
Removing a Card
1 Remove the computer's cover (refer to
2 On a table top turn the computer on to its side, with the system board will be closest to the surface of the table top.
® Networks
"Removing the Cover" on page
2 Installing Accessories in Your Computer
23).
Installing Expansion Cards
41