HP Brio 80xx Upgrade Manual page 37

9 Secure the card by replacing the slot cover screw. If you loosened the screws on adjacent slots, remember to tighten
them.
10 Reconnect the power, storage device, and front bezel fan connectors to the system board connectors. The connectors
are shaped to fit one way only (they have indexing pins). Slide the system board drawer back into the computer chassis.
11 If you are installing a VESA-standard video adapter card that uses the video controller, connect the expansion card's
cable to the VESA Feature Connector on the system board (refer to
PS2
PS1
Indexing Pin
2 Installing Accessories in Your Computer
PS
System Board
"Supported HP Accessories" on page
Installing Expansion Cards
20).
37