Hp 10000 G2 Rack Specifications; Rack Requirements - HP BL685c - ProLiant - 4 GB RAM Site Planning Manual

Specification
Height
Depth
Width
Standard enclosure weight *
Unboxed
Shipping
Maximum enclosure weight
Unboxed
Shipping
* Includes two power supplies, four fans, and one Onboard Administrator.

HP 10000 G2 rack specifications

For a current list of all rack specifications, see the Best Practices document on the HP website
(http://www.hp.com/support/HP10000G2SeriesRack_Manuals).
Rack
HP 10622
G2
HP 10636
G2
HP 10642
G2
HP 10647
G2
HP 10842
G2

Rack requirements

The enclosure is compatible with the following racks:
•
All HP 10000 and 10000G2 Series racks except the HP 10614 rack.
NOTE:
•
Telco racks
If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and
to prevent damage to the equipment:
•
Front and rear doors: If the rack includes closing front and rear doors, a minimum of 65 percent
open area must be provided to ensure adequate airflow.
Value
584.00 mm (23.00 in)
1013.00 mm (39.88 in)
607.00 mm (23.88 in)
65.80 kg (145.00 lb)
88.50 kg (195.00 lb)
136.00 kg (300.00 lb)
158.80 kg (350.00 lb)
Height Width
22U 600 mm (23.8
in)
36U 600 mm (23.8
in)
42U 600 mm (23.8
in)
47U 600 mm (23.8
in)
42U 800 mm (31.5
in)
The system is optimized for 10000 Series racks.
Depth Dynamic load
(gross)
1000 mm (39.4 544.3 kg (1200
in) lb)
1000 mm (39.4 689.5 kg (1520
in) lb)
1000 mm (39.4 907.2 kg (2000
in) lb)
1000 mm (39.4 Not applicable
in)
1000 mm (39.4 453.6 kg (1000
in) lb)
Hardware specifications and requirements 52
Static load
544.3 kg (1200
lb)
907.2 kg (2000
lb)
907.2 kg (2000
lb)
907.2 kg (2000
lb)
907.2 kg (2000
lb)