Configuration Scenarios; Example Configurations; Example Minimum Configuration; Example Typical Configuration - HP BL685c - ProLiant - 4 GB RAM Site Planning Manual

Configuration scenarios

Example configurations

The following configuration examples were calculated using the HP Blade Power Sizer Tool. This tool is
designed for facilities planning purposes only. Values obtained from the tool are based on worst case
loads. Whenever possible, actual measurements are recommended. Measurements should be made with
the intended configuration, application loading, and ambient environment.
Actual power usage will vary depending on application loading, ambient temperature, and other factors.

Example minimum configuration

This power summary is based on the following configuration:
•
HP BladeSystem c7000 enclosure (1)
•
Ethernet Pass-Through Modules for HP BladeSystem (2)
•
HP ProLiant BL460c Server Blades (2)
2.33-GHz Intel® Xeon™ processor 5148, dual-core (2 per server blade)
o
4GB (4 x 1GB) RAM per server blade
o
36GB 10,000-rpm SAS hard drives (2 per server blade)
o
Total system leakage current per branch
Total system inrush current per branch (2 mS)
Total system weight (includes power and rack)
Power credentials
Total input power
Total input VA
BTU
Total input current
Total airflow (CFM)
Total airflow (CMM)

Example typical configuration

This power summary is based on the following configuration:
•
HP BladeSystem c7000 enclosure (1)
•
HP Virtual Connect Ethernet Modules (2)
•
HP Virtual Connect Fibre Channel Modules (2)
Idle 100% utilization
601 W 764 W
613 VA 779 VA
2049 BTU 2604 BTU
2.95 A 3.75 A
116 131
3.280 3.713
0 mA
70 A
197 kg (435 lb)
Circuit sizing
1109 W
1132 VA
3781 BTU
5.44 A
156
4.429
Configuration scenarios 54