Adjusting Color - Kyocera FS-C5100DN User Manual

2
3
4
5
6
7
8
9
10
11
12
13

Adjusting Color

1
2
3
4
5
6
KX DRIVER
Right-click on the desired color printer.
Select Properties.
Select the Color Management tab.
Click Color Management to open the Color Management dialog box.
Select the Devices tab.
In the Devices list, select the desired color printer.
Select Use my settings for this device.
In the Profile selection list, select Manual.
Click Add, to open the Associate Color Profile dialog box.
Select an ICC profile, or click Browse to find a profile, and click OK. The profile
is added to the Profiles associated with this device list.
Select the desired color profile and click Set as Default Profile.
Click Close.
Color Adjustment enables you to customize the two color spaces in the driver
and save up to three custom groups. Color space changes can be made to red,
green, blue (RGB) levels or to hue, saturation and lightness (HSL).
In Color mode, select Color (CMYK).
In the Imaging tab, in the Adjustment list, select Custom 1, Custom 2, or
Custom 3, if you have already defined color settings. If you have not defined
color settings, select Edit to open the Adjustment Settings dialog box.
From the Custom Color Adjustment list, select Custom 1, Custom 2, or
Custom 3.
To open the Custom Color Adjustment dialog box, click Settings.
Select HSL (hue, saturation, lightness) or RGB (red, green, blue) to work with
as the color space.
Click the arrow buttons beneath the photograph to select one of three different
images. Different colors are emphasized in each of the photographs to aid in the
color adjustment process.
Imaging
6-8