User Settings; Identification; Units; Language Preference - Kyocera FS-C5100DN User Manual

Device Settings
4
5
6

User Settings

Identification

Setting User Identification
1
2

Units

Selecting a Unit of Measurement
1
2

Language Preference

2-8
In the SNMPv3 dialog box, select from the available options.
Click OK in the SNMPv3 dialog box.
Optional: You can click Apply to other models and select from available
models. The SNMP settings are applied to all selected models.
User Settings lets you specify user and department names, select the default
unit of measure, and change the driver display language.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Identification lets you identify your print job with a User name and
Department name, up to 31 characters. The User name can be used to identify
a print job stored on the hard disk.
You can type User name and Department information to be used with the Job
Storage (e-MPS) feature.
In Device Settings > User, type your preferred name in the User name text
box.
Type your department or group name in Department text box.
You can type up to 31 characters in the User name and Department text
boxes.
You can set Inches or Millimeters as the unit of measurement. This is used for
the following settings:
• Custom page size setting in the Page Sizes dialog box in the Basic tab.
• Spacing setting in the Watermark Add and Edit dialog boxes in the
Advanced tab.
• Poster settings and Gutter settings in the Layout tab.
You can select a unit for displaying measurements in the user interface.
In the Device Settings tab, click User.
Select Inches or Millimeters.
The Language preference option specifies the user interface language of the
Device Settings tab of Printer Properties and all tabs of Printing
Preferences.
User Guide