Print Size And Page Size; Creating A Custom; Printing With Custom Size Pages - Kyocera FS-C5100DN User Manual

Basic

Print Size and Page Size

Creating a Custom Page Size
1
2
3
4
5

Printing with Custom Size Pages

1
2
4-3
Transparencies must be printed using the MP tray, and labels and envelopes
require the MP tray. Ensure the paper is properly loaded by following the
instructions outlined in the printing system's Operation Guide.
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Compatibility Settings. If they are combined, Media type is not available on
the Basic tab. To change this setting, open Device settings > Compatibility
Settings and clear the Combine source and media type lists selection.
Print Size controls the output page size of the document. To use this setting,
ensure that the Page Size setting matches the page size setting in your
application. If the Print Size is different from the page size in your application,
then each page will be enlarged or reduced to match the Print Size. The
percentage value shown in brackets indicates the size of the Print Size setting
relative to the Page Size setting. If the Page Size does not match the page size
setting in the application (the size of the original), then, in most cases, the Print
Size is ignored and the document prints out based on its original size.
To use custom page sizes, they must be created and added to the Print size
list. The driver supports a maximum of twenty custom sizes.
In the Basic tab, click Page Sizes.
Click New.
A default custom name appears in the Name box. Type a name for your custom
page size.
Type or select values for the height and width. If the height or width value
exceeds the allowable limit, it automatically adjusts to the limit after Apply or
OK is clicked.
When done, click Apply.
The custom page size appears in the Print size list, which is used for enlarging
and reducing the sizes of prints.
To delete a custom page size from the Page Sizes dialog box, select the name
of the custom page size and click Delete.
You can print on custom-sized pages (or other media such as transparencies)
by performing these steps:
In your application, select Print from the File menu.
In the Print dialog box, click Properties.
User Guide