Color Mode; Collation; Duplex Printing; Multiple Pages Per Sheet - Kyocera FS-C5100DN User Manual

Quick Print

Color Mode

Collation

Duplex Printing

3-2
Color Mode
This icon changes between color and black & white printing. If desired, check
EcoPrint to make text and graphics appear lighter in the printed job.
EcoPrint does not increase print speed.
Collate
This icon changes the ordering of the printed pages. The page ordering
sequence can either be 123, 123, 123, or 111, 222, 333, and so on. You can
also Reverse the order of the printed pages by selecting this option.
(Reverse is available when Printer default is not selected under
Destination in the Basic tab. Reverse can be disabled in Device Settings
> Compatibility Settings.)
Print on both sides
This icon changes between duplex printing for flipping on the long edge,
duplex printing for flipping on the short edge, or for not using duplex printing.

Multiple pages per sheet

This icon changes between Off, 2, and 4 and for the number of sheets
printed on one page. For more than 4 sheets per page, define these settings
in Layout > Multiple pages per sheet.
Any basic print options can be Reset to the default values in the Quick Print
tab. This button only appears when it is accessed from an application's Print
dialog box.
The following sections describe some of the Quick Print tab options in more
detail. Color mode can also be found in the Basic and Imaging tabs, Collate
and Duplex printing in the Basic tab and Multiple pages per sheet in the
Layout tab. The Profiles options is accessed from Printing Preferences.
Color mode lets you choose full-color printing (CMYK) or printing with black
toner only. When the selection appears in color, all color settings in the driver
are enabled. Color cannot be chosen if Black & White is selected in the Device
Settings > Administrator Settings > Black & White mode.
Collate specifies the order in which the pages of a multiple copy job are printed.
With Collate selected, the first time the print job is sent to the printing system
the data is rendered as page images in the printing system's memory. The
remaining job copies are printed from the stored data. This avoids the extra
processing involved in sending every copy from the computer to the printing
system.
With Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with Collate selected, three
copies of a five-page document outputs as pages one through five in
succession, three times.
Duplex printing is printing on both sides of each page. Select Print on both
sides to start duplex printing. If it is not selected, then the printer prints on only
one side of each page. The printer system contains a duplex unit that turns the
paper over to allow printing on the reverse side. Print on both sides must be
selected to print on both sides of the cover and insert pages.
Flip on long edge
User Guide