Black & White Mode; Administrator Password; Snmp - Kyocera FS-C5100DN User Manual

Device Settings
Accessing Color Page Count
1
2
Black & White Mode

Administrator Password

Setting the Administrator Password
1
2
Clearing the Administrator Password
1
2
3
4

SNMP

2-6
• A blank page is counted as a black and white page.
Color page count records the number of color and black and white pages in
each print job. It embeds the count information in the document.
In the Device Settings tab, click Administrator.
Select Color page count.
Black & White mode disables all color settings in the driver's Imaging tab and
prints with black toner only.
To enable this feature, open Device Settings and click Administrator > Black
& White mode.
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. When
selected, this setting will prompt you to enter a password and confirm the
password. This password protection blocks access to the Job accounting,
SNMP Settings, Show Quick Print tab, and Black & White mode settings.
In Device Settings > Administrator Settings, select Password protect
administrator settings.
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
In the Device Settings tab, click Administrator.
In the Enter Password dialog box, type the password and click OK.
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box.
Click OK.
Simple Network Management Protocol (SNMP) is a set of rules that govern the
management of network devices, such as printing systems. SNMP settings
determine the level of security when using the Auto Configure feature, and
prevent unauthorized printing to the SNMPv3 printing system. SNMP settings
must be set in the printer driver and in the printing system's Command Center.
The following SNMP options are available:
SNMPv1/v2c
User Guide