Unknown User Settings; Unknown Id Job - Kyocera ECOSYS M2040dn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Unknown User Settings

Unknown User Settings

Unknown ID Job

This specifies the behavior for handling the jobs sent with unknown or unsent login user names or User ID. If the User
Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account ID is unknown.
The setting items are as follows.
Item
Permit
Reject
1
2
The job is permitted to be printed.
The job is rejected (not printed).
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2135dn/ECOSYS
M2635dn/ECOSYS M2635dw
ECOSYS M2040dn/ECOSYS
M2540dn/ECOSYS M2540dw
2
[▲] [▼] key > [Unknown User] key > [OK] key
Configure the settings.
[▲] [▼] key > [Unknown ID Job] > [OK] key > [▲] [▼] key > [Reject] or [Permit] > [OK] key
Descriptions
Login User Name
3500
4000
9-39
Login Password
3500
4000