Cf_Source Command; Cf_Input1 Command; Cf_Input2 Command - Sanyo PLC-WL2500A Manual

PLC-WL2500A / WL2501A/ WL2503A Expand Serial Command Functional Specifications
8.6.2

CF_SOURCE Command

Command "CF_SOURCE_%1"[CR]
Computer 1
Computer 2
%1
Input is HDMI
Input is Video
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
Details
returns "101" and the command is not executed.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.3

CF_INPUT1 Command

Command "CF_INPUT1_%1_"[CR]
"ANALOG" ---------- Select Analog RGB Input
%1 "YPBPR" ------------- Select Component
"SCART" ------------- Select SCART
Select Input - Computer 1 and source specified in %1 at once.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.6.4

CF_INPUT2 Command

Command "CF_INPUT2_%1_"[CR]
%1 "ANALOG" ---------- Select Analog RGB Input
Select Input - Computer 2 and source specified in %1 at once.
This command is available in normal Power ON status.
Details
Projector returns "101" by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Acceptable
Response
Unacceptable
"ANALOG" --------- Select Analog Input
"YPBPR" ----------- Select Component Input
"SCART" ----------- Select Scart Input
Input is
"UP" ---------------- Switch Input as follows
"DN" ---------------- Switch Input as follows
""ANALOG" --------- Select Analog Input
Input is "UP"
"DN"
Projector accepts parameter "UP"/"DN" but no operation is made.
"HDMI" ----------- Select HDMI Input
"UP"
"DN"
Projector accepts parameter "UP"/"DN" but no operation is made.
"VIDEO" ------------- Select Composite Video Input
"UP"
"DN"
Projector accepts parameter "UP"/"DN" but no operation is made.
S-VIDEO ------------- Select S-video Input
Input is "UP"
S-video "DN"
Projector accepts parameter "UP"/"DN" but no operation is made.
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
25/72
Analog →YPBPR →Scart →...
Scart →YPBPR →Analog →...